Heli-FOR Helimodelismo: Anti-faísca para ligar 12S

O SPS SafetyPowerSwitch é uma solução que evita a temida faísca durante a conexão da bateria. O SPS é um switch com dispositivo anti-faísca. Seu funcionamento é bastante simples, o switch (On / Off) funciona com um plug imantado (chave magnética), que atua no interruptor. Quando em off não temos nenhuma tensão na saída do switch. Ao remover o plug o switch é ligado em On e um LED verde ultra brilhante indica o sistema ativado.

Specification:

Electronic safety power switch for electric power systems
An anti-flash-circuitry prevents the dreaded sparks during connecting the battery
Separates the motor from the battery. The electric motor drive remains inactive and therefore non hazardous until activation
Finally you can work on your model without the fear of suddenly running motors
Shapely switch transmitter looking like a gasoline valve closer for simple mounting in the fuselage (an invention from EMCOTEC)
Completely contactless switching operation with an external magnet
An integrated ultra bright LED indicates the power-on state optically
High-class silicone connection cable of AWG 11 thickness
6-fold multilayer-board with up to 9 square mm copper width
For 6S up to 14S LiPo batteries (18V ... 60V)
60A continuous current and 120A peak current - perfect for F3A models

SPS SafetyPowerSwitch 60V 60/120A

Production description:

Electronic safety switch with anti flash protection. The original! From the inventor of the "gas cap" switch.

Electronic safety power switch for electric power systems. An anti-flash-circuitry prevents the dreaded sparks during connecting the battery.
Separates the motor from the battery. The electric motor drive remains inactive and therefore non hazardous until activation. Finally you can work on your model without the fear of suddenly running motors.
High-class silicone connection cable of 4mm² (AWG11) thickness. 6-fold multilayer-board with up to 9mm² copper width.
For 6S up to 14S LiPo batteries (18V to 60V). 60A continuous current and 120A peak current - perfect for F3A models.

Attention: The flash protection function of the SPS does not pre-charge the capacitor within the motor controller! Some manufacturers require the pre-charging of this capacitor. Perhaps the SPS might not work properly in this special case.

Delivery includes desired switch actuator with keyring pendant or SPS-RCS, screws, EMCOTEC 3D sticker, operating instructions.
ATTENTION: because of customer demands you are able to select the switch actuator you want! Please select the fitting unit. By default the SPS magnetic switch actuator will be delivered.